Sony VENICE MPC-3610 Operating Instructions Manual page 31

000 31
3. Camera Operations: Sub Display
Home Screen
Press the HOME button on the Assistant side to display the Home screen. You can check the status of the
unit and set basic settings for the unit on the Home screen.
Item name/Setting
value/Function
display area
Item name/Setting value/Function display area
ITEM key 1 ITEM key 2 ITEM key 3
1 2
4 5
ITEM key 4 ITEM key 5 ITEM key 6
[Note]
The areas labeled 1 to 6 correspond to ITEM keys 1 to 6
(page 39). Press an ITEM key to select the corresponding
item. The ITEM keys for functions displayed in orange text
color are enabled.
1.
FPS
Displays and sets the video frame rate.
2.
Exposure Index/Gain
Displays and sets the exposure index (EI) (top
icon displays the Base ISO sensitivity) or the
3
gain set by an RM-B170 or other remote
control unit.
[Note]
The gain value is displayed only when Technical
> System Configuration > RM/RCP Paint Control
(page 68) is set to On in the full menu.
3.
Shutter
Displays and sets the shutter speed/shutter
angle of the electronic shutter.
4.
ND Filter
6
Displays and sets the ND filter position.
5.
LUT
Displays and sets the monitor LUT.
6.
WB (White Balance)
Displays and sets the white balance.
Status display area
13
12
11
Status
display area
1.
Time data display
Displays the duration or timecode, depending
on the TC/Media category > TC Display setting
in the menu (page 44).
Displays the type of data currently shown in
the time data display, as follows.
TCG: Recorded timecode
TCR: Playback timecode
Dur: Duration
2.
Frame rate indicator
Displays the value of the Project category >
Project Frame Rate setting in the menu
(page 44).
3.
Imager mode indicator
Displays the Project category > Imager Mode
setting in the menu, and de-squeeze
information.
4.
Clip name display
Displays "Reel: Camera ID + Reel Number" and
"ShotNumber".
5.
Audio level meters
Displays the audio recording or playback
levels. The numbers 1 and 2 Indicate channels
1 and 2.
6.
Simultaneous recording indicator
When 1-slot simultaneous recording is
configured for the displayed media, a "Sub"
icon appears on the right of the displayed
main recording format.
1 2 3
10 9 8 7
7.
Recording format (codec) indicator
Displays the format of the recording on an AXS
memory card or an SxS memory card
(page 48).
8.
Power supply voltage/Remaining battery
capacity indicator
Displays the power supply voltage or
remaining battery capacity.
9.
Remaining media capacity indicator
Displays the active media icon, media type, slot
type (A/B), and remaining recording time
(when recording in the current recording
format).
It also displays the clip name during playback.
10.
Recording status indicator
Displays the following recording operation
states of the unit.
Display
Stby
 Rec
 Cache
11.
Thermometer icon
Displayed when a high temperature warning
message is issued.
The description is displayed in the Info
category in the menu.
4
5
6
Description
Recording standby
Recording
Picture cache recording
standby