Sony VENICE MPC-3610 Operating Instructions Manual page 35

000 35
3. Camera Operations: Operations on the Home Screen of the Sub Display
Changing the LUT category
You can change the target category for LUT
operations to User 3D LUT or Preset Look.
1
Press the Edit Look button (ITEM key 4) on the
LUT selection screen.
The Look selection screen appears.
2
Use the button (ITEM key 2),
(ITEM key 5), or MENU dial to enable category
selection.
3
Press the MENU dial or the Select button (ITEM
key 3).
4
Use the button (ITEM key 2),
(ITEM key 5), or MENU dial to select a category
(User 3D LUT or Preset Look).
5
Press the MENU dial or Set button (ITEM key 3)
to apply the setting.
Loading a User 3D LUT file
You can load a User 3D LUT file stored on an SD
card into the unit.
[Note]
Save the User 3D LUT file in the following directory on the SD
card (page 85).
PRIVATE\SONY\PRO\LUT\
1
Insert the SD card into the SD card slot
(page 12).
2
Press the Edit Look button (ITEM key 4) on the
LUT selection screen.
The Look selection screen appears.
3
Press the Load File button (ITEM key 4).
button
4
Press the MENU dial or the Select button (ITEM
key 3).
The load destination numbers (01 to 16) are
displayed.
button
A file name is displayed for loaded numbers.
5
Use the button (ITEM key 2),
(ITEM key 5), or MENU dial to select a load
destination number.
6
Press the MENU dial or the Select button (ITEM
key 3).
The file name of the User 3D LUT file stored on
the SD card is displayed.
7
Use the button (ITEM key 2),
(ITEM key 5), or MENU dial to select a file.
8
Press the MENU dial or the Load button (ITEM
key 3).
When the file is loaded successfully,
"Successfully loaded" is displayed.
9
Press the OK button (ITEM key 6).
Loading an ASC CDL file
You can load an ASC CDL file stored on an SD card
button
into the unit.
[Note]
Save the ASC CDL file in the following directory on the SD
card (page 85).
PRIVATE\SONY\PRO\CDL\
1
Insert the SD card into the SD card slot
(page 12).
2
Press the Edit Look button (ITEM key 4) on the
LUT selection screen.
The Look selection screen appears.
3
Press the Load File button (ITEM key 4).
4
Select Load ASC CDL File, and press the MENU
dial or the Select button (ITEM key 3).
button
The file name of the ASC CDL file stored on the
SD card is displayed.
5
Use the button (ITEM key 2),
(ITEM key 5), or MENU dial to select a file.
button