Sony VENICE MPC-3610 Operating Instructions Manual page 13

000 13
1. Overview: Location and Function of Parts
Viewfinder/Monitor Screen
During shooting (recording or standby) and playback, the information selected in Monitoring > OSD
Appearance > Status Info A/B Setup (page 63) in the full menu is displayed.
Information displayed on the screen while recording
1 2
35
34
33
32
31
30
29
28
27
26 25 24
1.
Recording frame rate indicator
Displays the recording frame rate and project
frame rate.
2.
Shutter angle/shutter speed indicator
Displays the shutter angle or shutter speed of
the electronic shutter, according to the
Technical > System Configuration setting in
the full menu.
3.
ND filter indicator
Displays the density of the ND filter. The
display value is a LOG (base 10) value
(page 55).
CLEAR
0.3 (1/2)
0.6 (1/4)
3 4 5 6 7 8 9
23 22 21
0.9 (1/8)
1.2 (1/16)
1.5 (1/32)
1.8 (1/64)
2.1 (1/128)
2.4 (1/256)
4.
Thermometer icon
Displayed when a high temperature warning
message is issued.
The description is displayed in the Info
category in the menu.
5.
Warning icon
Displayed when other than a high
temperature warning message is issued.
The description is displayed in the Info
category in the menu.
6.
Exposure index (EI)/gain indicator
Displays the EI value, or the gain value (dB
units) set by an RM-B170 or other remote
control unit.
[Note]
The gain value is displayed only when Technical
> System Configuration > RM/RCP Paint Control
10
(page 68) is set to On in the full menu.
11
12 13
7.
Color temperature indicator
Displays the color temperature and Tint value
14
of the white balance.
15
8.
Look information display
16
Displays the selected Look (page 57).
17
9.
Battery capacity/voltage indicator
18
Displays the following indicators according to
19
the type of battery power source.
Battery type Display
InfoLithium Battery remaining capacity
and remaining recording
battery
time
Anton/Bauer Remaining battery capacity
battery (% indicator)
Other batteries Input voltage
10.
VF LUT indicator
Displays the viewfinder LUT (page 56).
11.
VF Double Speed Scan indicator
Displays the on/off state of the function for
doubling the frame rate of the viewfinder
display.
12.
VF Peaking indicator
Displays the on/off state of the peaking
function of the viewfinder display.
13.
VF Zebra indicator
Displays the on/off state of the zebra function
of the viewfinder display (page 41).
14.
SDI OUT 1/2 connector LUT indicator
Displays the LUT setting of the SDI OUT 1/2
connectors (page 56).
15.
SDI OUT 3/4 connector LUT indicator
Displays the LUT setting of the SDI OUT 3/4
connectors (page 56).
16.
Monitor LUT indicator
Displays the LUT setting of the Monitor output
(page 56).
17.
HDMI LUT indicator
Displays the LUT setting of the HDMI output
(page 56).