Sony VENICE MPC-3610 Operating Instructions Manual page 67

000 67
3. Camera Operations: Full Menu List
Audio Menu
Default values are shown underlined and in
Audio > Audio Input
Makes settings related to audio recording levels.
[Note]
The audio recording level with AES/EBU signal selected is fixed.
Menu item Settings
CH-1 Audio Select Auto/Manual
Auto/Manual
CH-2 Audio Select
CH-1 Audio Level –99 to ±0 to +99
±0
CH-2 Audio Level –99 to to +99
MIC Reference –60dB/–50dB/–40dB
Audio > Audio Monitor
Makes settings related to audio monitoring.
Menu item Settings
Monitor CH When Monitor Output CH Pair is
set to CH-1/CH-2
CH-1/CH-2, CH-1, CH-2
When Monitor Output CH Pair is
set to CH-3/CH-4
CH-3/CH-4, CH-3, CH-4
Monitor Level 0 to 99
Audio > Audio Configuration
Makes settings related to audio input/output.
Menu item Settings
Alarm Level 0 to 99
Input Limiter Mode Off/–6dB/–9dB/–12dB/–15dB/
–17dB
AGC Level –6dB/–9dB/–12dB/–15dB/–17dB Selects the AGC characteristic (saturation level).
bold text.
Description
Automatically adjusts the audio recording when
set to Auto.
Automatically adjusts the audio recording when
set to Auto.
Adjusts the audio recording level when CH-1
Audio Select is set to Manual.
Adjusts the audio recording level when CH-2
Audio Select is set to Manual.
Selects the reference input level of the
microphone.
Description
Selects the audio channel that is output to the
headphones and speaker.
CH-1/CH-2 (CH-3/CH-4): Channel 1+2 (Channel
3+4)
CH-1 (CH-3): Channel 1 (Channel 3) only
CH-2 (CH-4): Channel 2 (Channel 4) only
Adjusts the monitor audio level.
Description
Adjusts the alarm audio level.
[Note]
This also sets the audio level of the beep emitted when
recording starts/stops if Technical > Switch & Rec Light >
Rec Start/Stop Beep is set to On in the full menu.
Selects the limiter characteristic (saturation level)
for large input signals when adjusting the audio
input level manually. Select Off if not using the
limiter.
Audio > Audio Configuration
Makes settings related to audio input/output.
Menu item Settings
AGC Mono/Stereo Mono/Stereo
MIC Input Mono/ Mono/Stereo
Stereo
Phantom Power +48V On/Off
Monitor Output CH CH-1/CH-2, CH-3/CH-4
Pair
Mono/Stereo
Headphone Mono/ST
Description
Automatically adjusts the input level of analog
audio signals recorded on channels 1 and 2, and
selects whether to make the adjustments
separately for each channel (Mono) or in stereo
mode (Stereo).
Selects whether the front microphone is
monaural (Mono) or stereo (Stereo).
Turns the function to supply a +48 V external
source (phantom power) to the microphone on/
off.
Sets the audio output channels to either channels
1 and 2 or channels 3 and 4.
Sets the headphones output to monaural (Mono)
or stereo (Stereo).