Sony VENICE MPC-3610 Operating Instructions Manual page 70

000 70
3. Camera Operations: Full Menu List
Technical > Network
Makes settings related to the network.
Menu item Settings
DHCP (On/Off)
IP Address (DHCP/On:
automatically, DHCP/Off:
192.168.1.50)
Subnet Mask (DHCP/On:
automatically, DHCP/Off:
255.255.255.0)
MAC Address
Regenerate Password (Execute/
Cancel)
Technical > APR
Executes APR (Auto Pixel Restoration: auto adjustment of the image sensor).
Menu item Settings
APR Execute/Cancel
Reset Execute/Cancel
Technical > Battery
Makes settings related to batteries.
Menu item Settings
Near End:Info Battery 5% to 100% (5% increments)
End:Info Battery 0% to 5%
11.5V
Near End:Sony Battery to 17V (0.1V increments)
Description
Enables/disables DHCP.
When set to [On], an IP address is automatically
assigned to the unit. To enter the IP address of the
unit manually, set to [Off].
[Note]
Configurable only when Network Mode is set to Station.
obtain Enter the IP address of the unit.
Enabled only when DHCP is [Off].
[Note]
Configurable only when Network Mode is set to Station.
obtain Enter the subnet mask of the unit.
Enabled only when DHCP is [Off].
[Note]
Configurable only when Network Mode is set to Station.
Displays the MAC address of the wireless LAN
adaptor connected to the unit.
Regenerates the password (execute by selecting
Execute).
[Note]
Executable only when Network Mode is set to Access
Point.
Description
Executes the automatic pixel noise reduction
function (execute by selecting Execute).
Deletes white flecks added by execution of the
APR function (execute by selecting Execute).
Description
Sets the threshold value at which the remaining
battery capacity indicator starts flashing when
using an InfoLithium battery.
Sets the threshold value for displaying the "Battery
End" warning when using an InfoLithium battery.
Sets the threshold value at which the remaining
battery capacity indicator starts flashing when
using a Sony non-InfoLithium battery.
Technical > Battery
Makes settings related to batteries.
Menu item Settings
End:Sony Battery 11.0V to 11.5V (0.1V increments)
Near End:Other Battery 11.5V to 17V (11.8V) (0.1V
increments)
End:Other Battery 11.0V to 14V (0.1V increments)
Detected Battery Sony Info Battery/Sony Battery/
Other Battery/DC IN (12V)/DC IN
(24V)
Technical > DC Voltage Alarm
Sets alarms relating to external DC supply voltage.
Menu item Settings
11.5V
DC Low Voltage1 to 17V (0.1V increments)
DC Low Voltage2 11.0V to 14V (0.1V increments)
DC(24V) Low Voltage1 22.5V to 34.0V (0.1V increments)
22.0V
DC(24V) Low Voltage2 to 28.0V (0.1V increments)
Technical > Control Display
Makes settings related to the displays.
Menu item Settings
Brightness level High/Mid/Low/Minimum
Technical > Genlock
Makes settings related to genlock.
Menu item Settings
HD SDI/Analog
Input Source
Description
Sets the threshold value for displaying the "Battery
End" warning when using a Sony non-InfoLithium
battery.
Sets the threshold value at which the remaining
battery capacity indicator starts flashing when
using a non-Sony battery.
Sets the threshold value for displaying the "Battery
End" warning when using a non-Sony battery.
Displays the result of automatic battery pack type
detection.
Description
Sets the threshold value for displaying a low
voltage warning when using an external power
source connected to the DC IN connector.
Sets the threshold value for displaying an
undervoltage warning when using an external
power source connected to the DC IN connector.
Sets the threshold value for displaying a low
voltage warning when using a 24 V external
power source connected to the DC IN connector.
Sets the threshold value for displaying an
undervoltage warning when using a 24 V external
power source connected to the DC IN connector.
Description
Adjusts the brightness of the sub display and mini
display.
Description
Selects the genlock input signal.
HD SDI: Digital
Analog: Analog