Sony VENICE MPC-3610 Operating Instructions Manual page 23

000 23
2. Preparation: Attaching a Viewfinder
To adjust the left/right position and height
(angle)
1
Loosen the rod lock lever at the front of the VF
attachment.
2
Slide the VF attachment rod left/right and turn
the rod up/down to adjust the viewfinder
position.
2 2
2 2
1 1
Rod lock lever
3
Tighten the rod lock lever.
[Note]
When the rod lock lever is loosened, adjust the lock
screw using a hex wrench (3 mm) to prevent the
viewfinder from falling down.
To adjust the viewfinder angle
You can adjust the angle of the viewfinder while
shooting.
1
Loosen the rotation lock lever on the
viewfinder mount.
2
Turn the viewfinder up/down to adjust the
angle.
Rotation lock lever
1 1
3
Tighten the rotation lock lever.
Lock screw
2 2