Appendix; Message List; Camera Lamp Display; Camera Screen Display (Main Menu) - Sony BRC-X401 Operating Instructions Manual

Appendix

Message List

The following messages and indications may appear on this camera. Perform the following as necessary.

Camera Lamp Display

Lamp status
POWER lamp (orange) and NETWORK
lamp (green) are flashing.

Camera Screen Display (Main Menu)

Message
FAN STOP!
PAN-TILT ERROR!
PAN-TILT FAULT!
MEMORY FAULT!
Description and solution
An error has occurred in the camera. Details of the error are displayed in the
main menu. Check the details of the error before solving the problem.
Description and solution
Turn off the device as it may malfunction if used in this state. Contact the Sony
Service Center or your licensed Sony dealer.
The movement of the camera has stopped due to an error in the pan-tilt
driving unit. Reset the pan/tilt position. Or, turn off and on the camera.
Turn off the device as it may malfunction if used in this state. Contact the Sony
Service Center or your licensed Sony dealer.
The memory of the camera has been damaged. The camera is running on an
older version. Turn off the camera and contact the Sony Service Center or your
licensed Sony dealer.
94