Sony VENICE MPC-3610 Operating Instructions Manual page 63

000 63
3. Camera Operations: Full Menu List
Monitoring Menu
Default values are shown underlined and in
Monitoring > Output Format
Makes settings related to output format.
Menu item Settings
SDI 1/2 The available settings vary
according to the imager mode,
project frame rate, and SxS
recording format settings.
SDI 3/4 The available settings vary
depending on the SDI 1/2
setting.
Monitor The available settings vary
depending on the SDI 1/2
setting.
HDMI The available settings vary
depending on the SDI 1/2
setting.
Monitoring > OSD Appearance
Makes settings related to information and frame lines superimposed on each output signal.
On/Off setting is selected using a checkbox (excluding Frame Line on Playback).
On: Checkbox selected
Off: Checkbox cleared
Menu item Settings
VF Status Info (On/Off,
Info. A/Info. B)
Frame Line (On/Off,
Line A/Line B)
SDI Status Info (On/Off,
SDI 1/2 Info. A/Info. B)
SDI 3/4
Frame Line (On/Off,
Line A/Line B)
[Note]
The display changes
according to the Output
Format > SDI 1/2 and SDI
3/4 settings.
Monitor Status Info (On/Off,
Info. A/Info. B)
Frame Line (On/Off,
Line A/Line B)
bold text.
Description
Selects the SDI 1/2 output format.
Settings vary according to the recording format
(page 96).
Selects the SDI 3/4 output format.
Settings vary according to the recording format
(page 96).
Selects the Monitor output format.
Settings vary according to the recording format
(page 100).
Selects the HDMI output format.
Settings vary according to the recording format
(page 100).
Description
Selects the information to display superimposed
on the viewfinder/monitor screen output image.
Selects the frame lines to display superimposed
on the viewfinder/monitor screen output image.
Selects the information to display superimposed
on the SDI 3/4 output signal.
Selects the frame lines to display superimposed
on the SDI 3/4 output signal.
Selects the information to display superimposed
on the SDI 3/4 output signal.
Selects the frame lines to display superimposed
on the SDI 3/4 output signal.
Monitoring > OSD Appearance
Makes settings related to information and frame lines superimposed on each output signal.
On/Off setting is selected using a checkbox (excluding Frame Line on Playback).
On: Checkbox selected
Off: Checkbox cleared
Menu item Settings
HDMI Same as SDI/Same as Monitor
Status Info A/B Setup Project
Info. A (On/Off)
Info. B (On/Off)
Timecode
Info. A (On/Off)
Info. B (On/Off)
Audio Level Meter
Info. A (On/Off)
Info. B (On/Off)
Look Status
Info. A (On/Off)
Info. B (On/Off)
Output LUT
Info. A (On/Off)
Info. B (On/Off)
Recording LUT
Info. A (On/Off)
Info. B (On/Off)
VF Status
Info. A (On/Off)
Info. B (On/Off)
Lens Status
Info. A (On/Off)
Info. B (On/Off)
Remote Control Status
Info. A (On/Off)
Info. B (On/Off)
Description
Selects whether the information displayed
superimposed on the HDMI output signal is the
same as for the SDI output or Monitor output.
Selects whether to display the project in the
output information set for Status Info A and Status
Info B.
Selects whether to display the timecode in the
output information set for Status Info A and Status
Info B.
Selects whether to display an audio level meter in
the output information set for Status Info A and
Status Info B.
Selects whether to display the type of selected
Look in the output information set for Status Info
A and Status Info B.
Selects whether to display the output LUT in the
output information set for Status Info A and Status
Info B.
Selects whether to display the recording LUT in
the output information set for Status Info A and
Status Info B.
Selects whether to display the viewfinder status in
the output information set for Status Info A and
Status Info B.
Selects whether to display the lens status in the
output information set for Status Info A and Status
Info B.
Selects whether to display the remote control
status in the output information set for Status Info
A and Status Info B.