Setup Display - Danfoss ADAP-KOOL AK-HP 780 Design Manual

Configuration - continued

Setup Display

1. Go to Configuration menu
2. Select Display setup
3. Define which readings are to be
shown for the individual outputs
56
In our example, separate displays
are not used. The setting is
included here for information.
Heat pump controller RS8GF202 © Danfoss 2015-08
3 - Display setup
Display
The following can be read for the four outputs..
Comp. control sensor
P0
P0 bar (abs)
Sctrl
Ss
Sd
Cond. control sensor
Pd
Pd bar (abs)
S7
Unit readout
Choose whether readings are to be in SI units (°C and bar)
or (US-units °F and psi)
AK-HP 780