Setup Display - Danfoss ADAP-KOOL AK-PC 781 Design Manual

Configuration - continued

Setup Display

1. Go to Configuration menu
2. Select Display setup
3. Define which readings are to be
shown for the individual outputs
70
In our example, separate displays
are not used. The setting is
included here for information.
Capacity controller RS8GG602 © Danfoss 2015-03
3 - Display setup
Display
The following can be read for the four outputs..
Comp. control sensor
P0 in temperature
P0 i bar-absolute
Pctrl bar-absolute
S4
Ss
Sd
Cond. control sensor
Tc
Pc bar-absolute
S7
Sgc
Shp
Pgc bar-absolute
Prec bar-absolute
Stw8
Shr8
Speed Compressor
Unit readout
Choose whether readings are to be in SI units (°C and bar) or
(US-units °F and psi)
AK-PC 781