Table of Contents
Advertisement
Configuration - continued
Setup Display
1. Go to Configuration menu
2. Select Display setup
3. Define which readings are to be
shown for the individual outputs
70
In our example, separate displays
are not used. The setting is
included here for information.
Capacity controller RS8GN202 © Danfoss 11-2013
3 - Display setup
Display
The following can be read for the four outputs..
Comp. control sensor
P0 in temperature MT and LT
P0 i bar-absolute MT and LT
S4 MT
Ss MT
Sd MT
Sd LT
Cond. control sensor
Tc MT
Pc MT bar-absolute
TC LT
PC LT bar absolute
S7
Unit readout
Choose whether readings are to be in SI units (°C and bar) or
(US-units °F and psi)
AK-PC 783
Advertisement
Table of Contents
