Lock Configuration - Danfoss ADAP-KOOL AK-HP 780 Design Manual

Configuration - continued

Lock configuration

1. Go to Configuration menu
2. Select Lock/Unlock configuration
3. Lock Configuration
The controller will now make a comparison of selected func-
tions and define inputs and outputs. The result can be seen in
the next section where the setup is controlled.
64 Heat pump controller RS8GF202 © Danfoss 2015-08
Press in the field against Configuration lock.
Select Locked.
Press OK.
The setup of the controller has now been locked. If you subsequently
want to make any changes in the controller's setup, remember first to
unlock the configuration.
AK-HP 780