Setup Display - Danfoss AK-PC 781A User Manual

Configuration - continued

Setup Display

1. Go to Configuration menu
2. Select Display setup
3. Define which readings are to be
shown for the individual outputs
AK-PC 781A
In our example, separate displays
are not used. The setting is
included here for information.
Capacity controller RS8HE202 © Danfoss 2017-07
3 - Display setup
Display
The following can be read for the four outputs..
Comp. control sensor
P0 in temperature
P0 i bar-absolute
Pctrl bar-absolute
S4
Ss
Sd
Cond. control sensor
Tc
Pc bar-absolute
S7
Sgc
Shp
Pgc bar-absolute
Prec bar-absolute
Stw8
Shr8
Speed Compressor
Unit readout
Choose whether readings are to be in SI units (°C and bar) or
(US-units °F and psi)
69