Setup General Alarm Inputs - Danfoss ADAP-KOOL AK-HP 780 Design Manual

Configuration - continued

Setup general alarm inputs

1. Go to Configuration menu
2. Select General alarm inputs
3. Define the required alarm
functions
AK-HP 780
In our example we select one
alarm function for monitoring the
liquid level in the receiver.
We have subsequently selected a
name for the alarm function and
for the alarm text.
Heat pump controller RS8GF202 © Danfoss 2015-08
3 - General alarm input
This function can be used to monitor all kinds of digital
signals.
No. of inputs
Set the number of digital alarm inputs
Adjust for each input
• Name
• Delay time for DI alarm (common value for all)
• Alarm text
57