System Setup - Danfoss ADAP-KOOL AK-HP 780 Design Manual

Configuration - continued

System setup

1. Go to Configuration menu
2. Select System setup
3. Set system settings
48 Heat pump controller RS8GF202 © Danfoss 2015-08
All system settings can be changed by pressing in the blue field with the
setting and then indicating the value of the required setting.
In the first field you enter a name for what the controller will be control-
ling.
When the time is set the PC's time can be transferred to the controller.
When the controller is connected to a network, date and time will
automatically be set by the system unit in the network. This also applies
to change-over Daylight saving.
AK-HP 780