Table of Contents
Advertisement
Configuration - continued
Setup Display
1. Go to Configuration menu
2. Select Display setup
3. Define which readings are to be
shown for the individual outputs
66
In our example, separate displays
are not used. The setting is
included here for information.
Capacity controller RS8HF102 © Danfoss 2017-07
3 - Display setup
Display
The following can be read for the four outputs..
Comp. control sensor
P0 in temperature
P0 in bar-
Ss
Sd
Cond. control sensor
Tc
Pc bar
Sgc
Pgc bar
Prec bar
Trec
Speed Compressor
Unit readout
Choose whether readings are to be in SI units (°C and bar) or
(US-units °F and psi)
AK-PC 772A
Advertisement
Table of Contents
