Start-Up Wizard (P6.5.3); Activating/Deactivating The Start-Up Wizard; Enabling/Disabling The Change Of Multimonitoring Items - Danfoss VACON NX FI6 Operating Manual

Operating Guide | VACON® NX Inverters FI4-FI8
Procedure
1. In the Security menu (M6), find the Parameter lock (P6.5.2) with the Browser buttons.
2. To go to the edit mode, push the Menu button Right.
3. To change the parameter lock status, use the Browser buttons.
4. To accept the change, push the [enter] button.

8.7.6.7 Start-up Wizard (P6.5.3)

The start-up wizard helps in the commissioning of the AC drive. By default, the start-up wizard is active.
In the start-up wizard, this information is set:
• the language
• the application
• the values for a set of parameters that are same to all applications
• the values for a set of application-specific parameters.
The table lists the functions of the keypad buttons in the start-up wizard.
Action
Accepting a value
Scrolling for options
Changing a value

8.7.6.8 Activating/Deactivating the Start-up Wizard

Context:
Use these instructions to activate or deactivate the Start-up Wizard function.
Procedure
1. In the System menu (M6), find the page P6.5.3.
2. To go to the edit mode, push the Menu button Right.
3. Select the action:
- To activate the start-up wizard, select Yes with the Browser buttons.
- To deactivate the start-up wizard, select No with the Browser buttons.
4. To accept the selection, push the [enter] button.

8.7.6.9 Enabling/Disabling the Change of Multimonitoring Items

Context:
Use Multimonitoring to monitor up to 3 actual values at the same time (see
Monitored values in the Application Manual of your application).
88 | Danfoss A/S © 2019.07
Button
[enter] button
Browser buttons Up and Down
Browser buttons Up and Down
8.2 Using the Monitoring Menu (M1)
Using the Control Panel
and the chapter
AQ299433367205en-000101 / DPD00908