Table of Contents
Advertisement
Operating Guide | VACON® NX Inverters FI4-FI8
Electrical Installation
Illustration 19:
FR4-FR6/FI4-FI6
8. Attach the cover of the drive. For the tightening torques of the screws, see
12.5 Tightening Torques for Cover
Screws. Make sure
that the control cables or the cables of the AC drive are not caught between the frame and the cable cover.
6.5.3 Installing the Cables, FR7/FI7
Context:
Follow these instructions to install the cables and cable accessories.'
For information on how to comply with the UL regulations in cable installation, see
6.1.2 UL Standards on
Cabling.
®
If it is necessary to connect an external brake resistor, see VACON
Brake Resistor Manual. See also
8.7.8.2 Setting the Internal Brake
Resistor
Connection.
Prerequisites:
Make sure that the delivery contains all necessary components. For the installation, the contents of the accessories bag is needed, see
4.1 Checking the
Delivery.
Open the covers according to instructions in
6.4.3 Get Access and Locate the Terminals for
FR7/FI7.
52 | Danfoss A/S © 2019.07
AQ299433367205en-000101 / DPD00908
Advertisement
Table of Contents
