Safety; Safety Symbols; Danger And Warnings - Danfoss VACON NX FI6 Operating Manual

Operating Guide | VACON® NX Inverters FI4-FI8

2 Safety

2.1 Safety Symbols

The following symbols are used in this manual:
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
Indicates information considered important, but not hazard-related (for example, messages relating to property damage).

2.2 Danger and Warnings

SHOCK HAZARD FROM INVERTER POWER UNIT COMPONENTS
The inverter power unit components are live when the inverter is connected to DC supply. A contact with this voltage can lead
to death or serious injury.
Do not touch the components of the power unit when the inverter is connected to DC supply. Before connecting the
-
inverter to DC supply, make sure that the covers of the inverter are closed.
SHOCK HAZARD FROM INVERTER TERMINALS
The motor terminals U, V, W, the brake resistor terminals, or the DC terminals are live when the inverter is connected to DC
supply, also when the motor does not operate. A contact with this voltage can lead to death or serious injury.
Do not touch the motor terminals U, V, W, the brake resistor terminals, or the DC terminals when the inverter is connected
-
to DC supply. Before connecting the inverter to DC supply, make sure that the covers of the inverter are closed.
Danfoss A/S © 2019.07
D A N G E R
W A R N I N G
C A U T I O N
N O T I C E
D A N G E R
D A N G E R
AQ299433367205en-000101 / DPD00908| 11
Safety