Danfoss VACON NX FI6 Operating Manual page 129

Operating Guide | VACON® NX Inverters FI4-FI8
12.10.10 Fault 8 - System fault, Subcode S1 - ASIC phase feedback
Cause
• operation malfunction
• defective component
Troubleshooting
• Reset the fault and start the drive again.
• If the fault shows again, ask instructions from the local distributor.
12.10.11 Fault 8 - System fault, Subcode S4 - ASIC trip
Cause
• operation malfunction
• defective component
Troubleshooting
• Reset the fault and start the drive again.
• If the fault shows again, ask instructions from the local distributor.
12.10.12 Fault 8 - System fault, Subcode S5 - Disturbance in VaconBus
Cause
• operation malfunction
• defective component
Troubleshooting
• Reset the fault and start the drive again.
• If the fault shows again, ask instructions from the local distributor.
12.10.13 Fault 8 - System fault, Subcode S6 - Feedback of charging switch
Cause
• operation malfunction
• defective component
Troubleshooting
• Reset the fault and start the drive again.
• If the fault shows again, ask instructions from the local distributor.
12.10.14 Fault 8 - System fault, Subcode S7 - Charging switch
Cause
• operation malfunction
• defective component
Danfoss A/S © 2019.07
Specifications
AQ299433367205en-000101 / DPD00908| 129