Single Image Switching; Pip Setting - RGBlink VENUS X1 Quick Start Manual

Single Image Switching

1. Boot the system default DVI to the current input source, if need seamless switching other
source such as VGA, push the VGA button.
2. DVI button light turns off after pushing VGA button. VGA button light will be on if the VGA signal is
effective and stable. And if the VGA signal is invalid or no input, VGA button light will flash. The same
method can be switched CVBS, HDMI and optional input signal.

PIP Setting

Push the [PIP/DSK] button, button LED light turns on, and enter to the PIP function menu.
LAYOUT: Can choose PIP layout, the corresponding results are as follows:
PIP L+T
SWAP IMAGE: It can set PIP to swap exchange, when choose ON, it can realize the IMAGE A and
IMAGE B exchange.
ALPHA: Can set the image transparency, the regulating range is among 0 to 16.
SELECT: Can choose to set the size or position of IMAGE A or IMAGE B individually.
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
PBP L+R
7
Tel: 00865925771197
Email: sales@rgblink.com
PBP T+B
Fax: 00865925788216
http://www.rgblink.cn