User Define The Scale Key - RGBlink VENUS X1 Quick Start Manual

push the knob to confirm.
(1) If choose <FREEZE>, push the button, its LED light turns on, and freeze the image. Push the
button again, its LED light is off, and output the video image.
(2) If choose <TEST PATTERN>, push the button, its LED light turns on, the output will be switched
to test pattern. There are 66 kinds of test patterns. If choose <AUTO SWITCH>, VENUS X1 will
output all the test patterns one by one, and the interval between is 1 to10S. Push the button
again, its LED light is off, and output the video image.
(3) If choose <BRIGHT>, push the button, its LED light turns on, user can adjust the brightness,
contrast, saturation, sharpness, color red, color green, color blue and gamma. If image quality
distorts by improper operation, it can be recover by reset.

User Define the SCALE Key

System default the [SCALE] button as scale function. push the button to enter the scale menu. Turn the
knob to select the relevant sub menus.
For more details, please refer to:
Besides SCALE, user can define this button as TAKE, the operations are as follows:
1. Push the [MENU] button to enter to the menu items, turn the knob, and choose <SYSTEM>.
2. Push the knob to confirm, turn the knob, and choose <USER DEFINED BUTTON>.
3. Push the knob to confirm, turn the knob, and choose <SCALE KEY>.
4. Push the knob to confirm, turn the knob, and choose <TAKE>, push the knob to confirm.
5. After define SCALE KEY as TAKE, the SCALE button will light up.
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Set the Size and Position of Single
24
Image.
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn