RGBlink VENUS X1 Quick Start Manual page 17

(11) Turn the knob, and choose <X>, set X as 360 (Note: X=HORIZONTAL CARD×WIDTH, in the
previous part, we set horizontal card as 3 and width as 120). Shown as follows:
(12) Same as above, set X of Port D of No.2 sending card as 360. Then connect the Port
D and Port U of Two Sending Cards to LED Screen is finished.
Rendering is as follows:
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
->X
Y
SAVE TO SENDER CARD
RESET
->X
Y
SAVE TO SENDER CARD
RESET
0
0
360
0
16
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn