RGBlink VENUS X1 Quick Start Manual page 15

3. Connect the Port D and Port U of Two Sending Cards to LED Screen
(1) First, make sure the device is in normal operation.
(2) Choose the input source, for example, DVI.
(3) Connect four cables to Port U1, Port D1, Port U2 and Port D2 respectively.
(4) Connect Port D1 and Port U1 of No.1 Sending Card to LED screen, the settings are same as
"Connect the Port D and Port U of One Sending Card to LED Screen".
(5) Same as above, connect Port D2 and Port U2 of No.2 Sending Card to LED screen.
(6) Turn the knob, and select <LED MANAGEMENT>:
(7) Turn the knob, choose <SENDING CARD NO.> in <QUICK CONNECTION> option, push the knob
to confirm. Turn the knob, choose No.2, push the knob to confirm. Shown as follows:
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
SYSTEM
->LED MANAGEMENT
LANGUAGE/语言
FACTORY RESET
->QUICK CONNECTION
ADVANCED
SENDING CARD TYPE
->SENDING CARD NO.
OUTPUT FORMAT
QUICK CONNECTION
>>
>>
ENG
>>
>>
>>
LINSN
No.2
>>
>>
14
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn