User Define The Black Key - RGBlink VENUS X1 Quick Start Manual

Hide thumbs Also See for VENUS X1:

Table of Contents

knob, and choose <TEXT OVERLAY>, push the knob to confirm.

Then enter into TEXT OVERLAY menu items, turn the knob, and choose <TEXT OVERLAY>, push

the knob to confirm, turn the knob again, and choose "ON" to enable the text overlay function.

4. Make sure VGA input is IMAGE B, and DVI input is IMAGE A, if not, choose <SWAP WINDOW>

option by pushing [PIP] button, and choose "ON" for <SWAP WINDOW>.

5. Choose the VGA image in "IMAGE B" in <SELECT> option by pushing <PIP> button, and push

[SCALE] button to adjust the size and position of VGA image, then set the VGA image to the required

position.

The standard position and size is: ensure the VGA image overlay on the DVI image, display normally

and without black edges. If there are black edges around VGA image, choose <ZOOM> option in

<INPUT> to adjust.

6. Set the text overlay mode: choose <PRESET> option in <TEXT OVERLAY>, push the knob to enter

into the <PRESET> menu items. Turn the knob to choose the preset mode, for example, set the VGA

text as WhOnBk, choose WhOnBk1 or WhOnBk2 (Note: Text Overlay only support monochrome

subtitles), user can also adjust the <BLEND MODE> or <BLEND LEVEL> to get a better effect.

7. Push the [SAVE/1] button to save the above parameters.

User Define the BLACK Key

System default the [BLACK] button as black function. Push the button, its LED light turns on, the output

will be switched to black, push the button again, its LED light is off, and output the video image.

For more details, please refer to:

Besides BLACK, user can define this button as FREEZE, TEST PATTERN and BRIGHT, the

operations are as follows:

1. Push the [MENU] button to enter to the menu items, turn the knob, and choose <SYSTEM>.

2. Push the knob to confirm, turn the knob, and choose <USER DEFINED BUTTON>.

3. Push the knob to confirm, turn the knob, and choose <BLACK KEY>.

4. Push the knob to confirm, turn the knob, and choose <FREEZE>, <TEST PATTERN> or <BRIGHT>,

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Using Black

Out.

Tel: 00865925771197

Email: sales@rgblink.com

Fax: 00865925788216

http://www.rgblink.cn

Table of Contents