RGBlink VENUS X1 Quick Start Manual page 29

Secondly refer to router's instruction (user manual specification), and find out router's default network
segment.
If router's default network segment is 192.168.0.1, then it is same to processor IP address segment,
open up windows control software and user can directly control on VENUS X1.
If router's default network segment is 192.168.1.1, then user need to change router's default gateway
or change processor's IP, both methods are available, but we suggest to change processor's IP.
Method one: Change processor's IP.
Press MENU on front panel and go into items as below image shows. Change processor's IP to be
192.168.1.100, confirm and restart the processor, then user can directly control on VENUS X1 via
windows control software.
Method two: Change router's gateway.
Type in 192.168.1.1 on the browser and go into router setting.
Type in default account and code (please refer to the router user manual for the information).
Go to router setting part and find out "LAN port setting", change the default value "192.168.1.1" to be
"192.168.0.1".
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
28
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn