Table of Contents
Advertisement
6. System Setup and Operation
How to Realize Single Image Switching
How to Realize Single Image Switching
Boot the system default CV1 to the current input source (key light and
scintillation), if need seamless switching other source such as DVI, direct
light touch DVI key, LCD screen display as follows
Choose DVI buttons, CV1 key light is off, and DVI key lights and shining,
can realize single picture of input signal source switching (input signal
source by original CV1 switching to DVI).The same method can be
switched CV2, VGA, USB.
Note
Seamless switch: means signal switch will not
appear any flash point, black, shaking or delay
VSP 112W
SOURCE SELECT:
>DVI
User Manual
85
Advertisement
Table of Contents
