RGBlink VENUS X1 Quick Start Manual page 14

f. Turn the knob, and choose <Offset (A/B) Y>, push the knob to confirm. Turn the knob, set Offset
(A/B) Y as 240 (Note: Offset (A/B) Y=VERTICAL CARD×HEIGHT, in the previous part, we set
vertical card as 2 and height as 120). Shown as follows:
g. Turn the knob, and choose <CONNECT CARD TYPE>, shown as follows:
Choose the connection mode, the setting is same as Port U1. Then connection of both the Port D
and Port U of One Sending Card to LED Screen is finished.
Rendering is as follows:
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
SENDING CARD SET
->RECEIVING CARD SET
->CHOOSE CABLE
HORIZONTAL CARD
VERTICAL CARD
WIDTH
HEIGHT
Offset (A/B) X
->Offset (A/B) Y
CONNECT CARD TYPE
HEIGHT
Offset (A/B) X
Offset (A/B) Y
->CONNECT CARD TYPE
>>
>>
PORT D
3
2
120
120
0
240
>>
120
0
240
>>
13
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn