Power Demand; Date/Time - Siemens SENTRON PAC4200 Manual

7.2.5

Power demand

Settings for the load profile can be made in the "Power demand" menu item.
You can find more information on the load profile in chapter Load profile (Page 23).
Selection
SUBPERIOD TIME
SUBPERIOD #
SYNC. SOURCE
7.2.6

Date/time

Setting the date and time.
PAC4200
System Manual, 05/2019, A5E02316180B-05
Range
1 min
•
2 min
•
3 min
•
4 min
•
5 min
•
6 min
•
10 min
•
12 min
•
15 min
•
20 min
•
30 min
•
60 min
•
1: "Fixed block"
•
2 ... 5: "Rolling block"
•
Source of the synchronization pulse for synchronizing the load profile
recording.
NONE: Synchronization switched off.
•
BUS: Synchronization via the communication interfaces.
•
DIG.INPUT: Synchronization via digital input
•
INT. CLOCK: Synchronization via the internal clock.
•
For synchronization via the digital input, the digital input must first be
parameterized for this purpose.
The "SYNC. SOURCE" field is automatically reset to "NONE" if another
function is assigned to the digital input.
7.2 Parameterizing via the user interface
Parameterizing
Factory setting
15 min
1
NONE
95