Parameterizing
7.2 Parameterizing via the user interface
Selection
HYSTERESIS
STATUS
LIMIT LOGIC
Figure 7-1
106
Range
Threshold buffer. This prolongs the limit violation.
The hysteresis refers to the disappearance of the limit violation or the
point when the level returns below the defined threshold.
0.0% ... 20.0%
The percentage refers to the threshold value in the "VALUE" field.
See the figure below "Effect of pickup delay and hysteresis".
Indicates whether the limit value is currently violated.
Yes, violation.
•
No, no violation.
•
Refer to the following section "LIMIT LOGIC".
Effect of pickup delay and hysteresis on upper and lower limit violations
Factory setting
0.0%
-
-
System Manual, 05/2019, A5E02316180B-05
PAC4200