Events - Siemens SENTRON PAC4200 Manual

Operation
6.2 Special displays
6.2.3

Events

The device reports the occurrence of certain events. These events are listed in the event
recording undertaken by SENTRON PAC4200. You can acknowledge acknowledgable
events in a popup window on the device.
Displaying events
Table 6- 1
Symbol
The events are divided into the following event classes:
● Operating information
● System information
● Operation
The following information is shown for each event:
● Event
● Event class
● Date and time when the event occurred
● Reason why the event occurred
● Interface if applicable
● Measured variable affected and corresponding measured value if applicable
● Limit value if applicable
● Address of the digital output if applicable
● Address of the digital input if applicable
82
Meaning of the symbols in the events list
Meaning
No symbol Information
! Warning
Alarm
Incoming event
Outgoing event
Overcurrent, overvoltage
Changed
Q Acknowledged event
# Interrupt, error, missing
Upper limit violated, out of range
Lower limit violated
...= 0 Reset
...= 1 Condition met
System Manual, 05/2019, A5E02316180B-05
PAC4200