Siemens SENTRON PAC4200 Manual page 47

Installation
3.1 Introduction
Mounting position
The device is designed for vertical installation.
Figure 3-1
NOTICE
Ensure ventilation
Insufficient ventilation may result in damage to the components. Please ensure that the
ventilation slots of the housing are not obstructed. The wiring, cable feed or other
components must not obstruct ventilation.
Note
Avoid condensation
Sudden fluctuations in temperature can lead to condensation. Condensation can affect the
function of the device. Store the device in the operating room for at least two hours before
commencing installation.
Circuit breaker
Connect a suitable circuit breaker upstream of SENTRON PAC4200 in order to disconnect
the device from the power supply.
● The circuit breaker must be installed close to the device and must be easily accessible for
the user.
● The circuit breaker must be marked as the circuit breaker for the device.
See also
Dimensional drawings (Page 141)
46
Mounting position
System Manual, 05/2019, A5E02316180B-05
PAC4200