Siemens SENTRON PAC4200 Manual page 111

Parameterizing
7.2 Parameterizing via the user interface
Reset
This resets the device settings to the instantaneous values or the factory default values.
The following groups of values can be reset:
● Maximum/minimum values
● Counters
● Universal counter
● Factory settings
● Communication parameters
Note
Restarting of the device
Resetting the last two value groups "FACTORY DEFAULTS" and "COMMUNICATION
PARAM." causes the device to reboot.
Selection
CLEAR MIN/MAX VALUES
RESET COUNTERS
RESET UNIV. COUNTERS
RESET PULSE COUNTERS
FACTORY SETTINGS
COMMUNICATION PARAMETERS Resets all communication settings to 0.0.0.0.
EXECUTE
110
Range
Resets all minimum and maximum values to the instantaneous value.
Resets the following counters to 0 (zero):
Energy counter
•
– Active energy
– Reactive energy
– Apparent energy
Operating hours counter
•
Resets the configurable universal counters to 0 (zero).
Resets the pulse counters.
This option is only available if at least one SENTRON PAC 4DI/2DO expansion
module
is plugged into the SENTRON PAC4200 device.
Resets all device settings to the default values.
•
Clears minimum/maximum values.
•
Resets all counters.
•
Reset function. Resets the selected value groups.
System Manual, 05/2019, A5E02316180B-05
PAC4200