Repair; Disposal - Siemens SENTRON PAC4200 Manual

Service and maintenance

8.5 Repair

7. Start the system up again. Restore the supply voltage of the device.
The backed-up data are available automatically.
8. Reset the clock.
9. Test the operating capability of the SENTRON PAC4200.
8.5 Repair
Procedure
Note
Loss of warranty
If you open the device, you will invalidate the Siemens warranty. Only the manufacturer is
permitted to repair the device. Return faulty or damaged devices to Siemens for repair or
replacement.
If the device is faulty or damaged, proceed as follows (only during the warranty period):
1. Uninstall the device; refer to chapter Deinstallation (Page 51).
2. Pack the device such that it cannot be damaged during transport.
3. Return the device to Siemens. You can obtain the address from:
– Your Siemens sales partner
– Technical Assistance
8.6

Disposal

● Dispose of the module in accordance with the applicable laws and regulations in your
country.
● The device must not be disposed of with general domestic waste.
● Old devices must be collected and disposed of separately.
126
System Manual, 05/2019, A5E02316180B-05
PAC4200