Introduction; Components Of The Product; Latest Information - Siemens SENTRON PAC4200 Manual

Introduction

1.1

Components of the product

The package includes:
● 1 PAC4200 measuring device
● 1 battery
● 2 brackets for panel mounting
● 1 set of PAC4200 Operating Instructions
Available accessories
● powerconfig software
● powermanager software
1.2

Latest information

Up-to-the-minute information
You can find further support on the Internet
assistance).
Third-party software information
This product, solution or service ("Product") contains third-party software components listed
in this document. These components are Open Source Software licensed under a license
approved by the Open Source Initiative (https://opensource.org/), or similar licenses as
determined by SIEMENS ("OSS") and/or commercial or freeware software components. With
respect to the OSS components, the applicable OSS license conditions prevail over any
other terms and conditions covering the Product. The OSS portions of this Product are
provided royalty-free and can be used at no charge.
If SIEMENS has combined or linked certain components of the Product with/to OSS
components licensed under the GNU LGPL version 2 or later as per the definition of the
applicable license, and if use of the corresponding object file is not unrestricted ("LGPL
Licensed Module", whereas the LGPL Licensed Module and the components that the LGPL
Licensed Module is combined with or linked to is the "Combined Product"), provided the
relevant LGPL license criteria are met, you are entitled to modify the Combined Product for
your own use, including but not limited to the right to modify the Combined Product to relink
modified versions of the LGPL Licensed Module, and you may reverse-engineer the
PAC4200
System Manual, 05/2019, A5E02316180B-05
(https://support.industry.siemens.com/cs/ww/en/view/63452759)
(https://support.industry.siemens.com/cs/ww/en/view/64850998)
(http://www.siemens.de/lowvoltage/technical-
1
7