Table of Contents
Advertisement
PSW
Command
Name
Supported with firmware
Description
Command format:
password PSW new_password
parameters of the command:
new_password – a new security password. The password must be 4 characters long
and consist of only figures from 0 to 9.
Sample command:
5672 PSW 2442
Sample reply:
#PSW 2442
Security password was changed to 2442.
PSW
Protection password changing
AGST-1.12 and higher
Command is intended to change the device protection
password.
AutoGRAPH-ST – Remote Control Command
63
Advertisement
Table of Contents
