AutoGRAPH- ST – Remote Control Command
DELAYOFF
Command
Name
Supported with firmware
Description
Command format:
password DELAYOFF=delay_mode,delay_time;
parameters of the command:
delay_mode – delay of switching to sleep mode:
0 – disables the delay;
1 – enables the delay.
delay_time – delay time, in minutes. Minimum value is 0, maximum value is 10.
Sample command:
5672 DELAYOFF=1,10;
Sample reply:
#DELAYOFF=1,10;
The device is set up to stay in tracking mode during 10 minutes after sending SMS.
36
DELAYOFF
Sleep mode delay
AGST-0.75 and higher
Command is intended to set up a delay of switching to
sleep mode. If the delay is enabled, the device will stay
in tracking mode during the delay after sending SMS
with position data. During this time a customer can send
new settings to the device via SMS.