GSMAPNUSER
Command
Name
Supported with firmware
Description
Command format:
password GSMAPNUSER=user;
parameters of the command:
user – a user name of the APN. To enquire APN settings contact with your mobile
operator or get it from the operator‟s official web site.
Sample command:
5672 GSMAPNUSER=utel;
Sample reply:
#GSMAPNUSER=utel;
User name of the APN is changed to – utel.
GSMAPNUSER
APN user setup
AGST-0.75 and higher
Command is intended for specifying a user name of
APN.
AutoGRAPH-ST – Remote Control Command
13