Table of Contents
Advertisement
SAVECONFIG
Command
Name
Supported with firmware
Description
Command format:
password SAVECONFIG=1;
Sample command:
5672 SAVECONFIG=1;
Sample reply:
#SAVECONFIG=1;
Device settings are successfully saved.
SAVECONFIG
Configuration saving
AGST-0.75 and higher
Command is intended for saving all new settings which
will be sent to the device after the last restart. If the
settings haven‟t been saved with this command they will
be valid till the device restart (or restart of GSM modem).
After the restart, all unsaved settings will be reset to last
saved values.
AutoGRAPH-ST – Remote Control Command
43
Advertisement
Table of Contents
