Table of Contents
Advertisement
AutoGRAPH- ST – Remote Control Command
CRG
Command
Name
Supported with firmware
Description
Command format:
password CRG PeriodUnit
parameters of the command:
Period – period of data transferring to the server and sending SMS with the data.
Unit – unit of Period:
H – period in hours, from 1 to 24 hours.
M – period in minutes, from 10 to 1440 minutes.
Sample command:
5672 CRG 80M
Sample reply:
#TKR 80M
Cargo profile is activated in the device: every 80 minutes (1 h 20 min) the device will
switch to tracking mode, fix position and send the collected data to server and by means
of SMS. After that the device will switch to sleep mode.
56
CRG
Cargo profile activation
AGST-1.12 and higher
Command is intended for enabling Cargo profile. If the
profile is enabled, the device acquires the position data
with specified period and sends it to the data server and
to telephone numbers via SMS. If this profile is enabled,
the device fixes position with default period (about 5 sec)
and records the data into the memory. The collected
data will be transferred to the server with the period of
data transferring.
Advertisement
Table of Contents
