Table of Contents
Advertisement
SERVEREN
Command
Name
Supported with firmware
Description
Command format:
password SERVEREN=flag;
parameters of the command:
flag – specify following value:
0 – to disable data transferring to the server;
1 – to enable data transferring to the server;
Sample command:
5672 SERVEREN=1;
Sample reply:
#SERVEREN=1;
Data transmisison to the server is enabled in the device.
SERVEREN
Data transmission to server
AGST-0.75 and higher
Command
allows
transmission to the server. If the option is enabled, the
device will switch to the tracking mode and transfer data
to the specified server with preset period or at scheduled
time.
AutoGRAPH-ST – Remote Control Command
enabling
or
disabling
of
data
21
Advertisement
Table of Contents
