Table of Contents
Advertisement
SMSEN
Command
Name
Supported with firmware
Description
Command format:
password SMSEN=sms,sms_gate;
parameters of the command:
sms – sending SMS with the current position data to preset telephone numbers:
0 – disabled;
1 – enabled.
sms_gate – sending SMS with the current position data to data server via SMS gate:
0 – disabled;
1 – enabled.
Sample command:
5672 SMSEN=1,0;
Sample reply:
#SMSEN=1,0;
SMS sending with current position data is enabled in the device.
Note:
Sending data to the server via SMS gate is available in AutoGRAPH-ST
devices with firmware of version AGST-1.11 or higher. For previous versions
of the firmware use the following format of the command "SMSEN=sms;".
This command provides enabling SMS sending only to telephone numbers.
SMSEN
Sending SMS
AGST-0.75 and higher
Command provides enabling or disabling of SMS
sending option. If the option is enabled, the device will
send SMS it current position data with specified period
or at scheduled time.
AutoGRAPH-ST – Remote Control Command
33
Advertisement
Table of Contents
