Table of Contents
Advertisement
BALANCELEVEL
Command
Name
Supported with firmware
Description
Command format:
password BALANCELEVEL=level;
parameters of the command:
level – minimal balance level. The parameters must be specified without currency.
Sample command:
5672 BALANCELEVEL=50;
Sample reply:
#BALANCELEVEL=50;
Minimal balance level is changed to 50. If the balance is lower than 50, the device will
send the notification along with the coordinates.
BALANCELEVEL
Low SIM balance notification
AGST-1.15 and higher
Command is intended to set a minimal balance level to
initiate sending of notification to user.
AutoGRAPH-ST – Remote Control Command
17
Advertisement
Table of Contents
