Table of Contents
Advertisement
SMSNUMBERx
Command
Name
Supported with firmware
Description
Command format:
password SMSNUMBERx=tel_number;
parameters of the command:
tel_number – a telephone number for sending SMS with current position data.
Telephone number should be specified with prefix "+7"
х – an index number of the specified telephone number, from 1 to 3. The device
supports sending SMS to 3 different telephone numbers simultaneously.
Sample command:
5672 SMSNUMBER1=+79001112233;
Sample reply:
#SMSNUMBER1=+79001112233;
The device is set up to send SMS with current position data to the number +79001112233.
SMSNUMBERx
Telephone numbers for sending SMS
AGST-0.75 and higher
Command is intended to set telephone numbers which
the device will send SMS to.
AutoGRAPH-ST – Remote Control Command
31
Advertisement
Table of Contents
