AutoGRAPH- ST – Remote Control Command
GSMSERVER
Command
Name
Supported with firmware
Description
Command format:
password GSMSERVER=server;
parameters of the commands:
server – IP address or a domain name of data server.
Sample command:
5672 GSMSERVER=office.tk-chel.ru;
Sample reply:
#GSMSERVER=office.tk-chel.ru;
The device is specified to transfer data to next server - office.tk-chel.ru.
18
GSMSERVER
Data server address
AGST-0.75 and higher
Command is intended to set an address of data server
which the device transfers data to.