Table of Contents
Advertisement
AutoGRAPH- ST – Remote Control Command
SMSPERIOD
Command
Name
Supported with firmware
Description
Command format:
password SMSPERIOD=hours,minutes,type;
parameters of the command:
hours,minutes – a period or exact time of sending SMS with current position data.
Minimum value is 10 sec, maximum – 168 hours (or 1 week).
type – mode of SMS sending:
0 – enables periodical SMS sending with the specified period;
1 – enables everyday SMS sending at the scheduled time.
Sample command:
5672 SMSPERIOD=0,30,0;
Sample reply:
#SMSPERIOD=0,30,0;
The device is set up to send SMS every 30 minutes.
34
SMSPERIOD
SMS sending period
AGST-0.75 and higher
Command is intended to set up a period or time of
sending SMS with current position data to preset
telephone numbers. This command is used to specify
both the period of SMS sending and the exact time of
sending SMS. In last case the device won‟t send the
data periodically, but will do it every day at scheduled
time.
Advertisement
Table of Contents
