AutoGRAPH- ST – Remote Control Command
SMTPPASS
Command
Name
Supported with firmware
Description
Command format:
password SMTPPASS=password;
parameters of the command:
password – password used to access to SMTP server.
Пример команды:
5672 SMTPPASS=userpassword;
Пример ответа:
#SMTPPASS=userpassword;
The device uses the following password to access to SMTP server – userpassword.
26
SMTPPASS
Password for accessing the SMTP server
AGST-0.75 and higher
Command is intended to set up a password used to
access
to SMTP
"SMTPLOGIN" command.
server. To set a login, use