AutoGRAPH- ST – Remote Control Command
BAL
Command
Name
Supported with firmware
Description
Command format:
password BAL code
parameters of the command:
code – a code for checking SIM balance. The parameter can be empty. In this case the
request will be send to a code specified in the device settings.
Sample command:
5672 BAL *100#
Sample reply:
#BAL 467.54
Balance of the device SIM – 4.5$.
58
BAL
Balance checking
AGST-1.12 and higher
Command is intended for checking a current balance of
the SIM card installed in the device.