Table of Contents
Advertisement
GPSPERIOD
Command
Name
Supported with firmware
Description
Command format:
password GPSPERIOD=hour,min;
parameters of the command:
hour,min– period of data recording. The period must be specified in the following format
hour,minute.
Sample command:
5672 GPSPERIOD=2,0;
Sample reply:
#SECURESETUP=2,0;
The device will record the data every two hours.
GPSPERIOD
Data recording period
AGST-1.11 and higher
Command is intended for specifying data recording
period.
AutoGRAPH-ST – Remote Control Command
47
Advertisement
Table of Contents
