SMTPSERVER
Command
Name
Supported with firmware
Description
Command format:
password SMTPSERVER=server;
parameters of the command:
server – an address of SMTP server.
Sample command:
5672 SMTPSERVER=smtp.mail.ru;
Sample reply:
#SMTPSERVER=smtp.mail.ru;
The device is set up to send Email via following SMTP server – smtp.mail.ru.
SMTPSERVER
SMTP server address
AGST-0.75 and higher
Command is intended to set SMTP server address
which will be used for sending Email with current
coordinates.
AutoGRAPH-ST – Remote Control Command
23